This R Markdown document illustrates the power calculation using the maximum of weighted log-rank statistics in a group sequential analysis for the delayed effect example from Prior (2020). The hazards in both arms are 0.25 per month for the first 1.5 months, and the hazard of the active arm drops to 0.125 per month thereafter, while the hazard of the placebo arm remains at 0.25 per month. Assume that there is no censoring. The enrollment rate is 25 patients per month, and the total number of patients to enroll is 100. Suppose also that an interim analysis occurs after observing 50 events and the final analysis takes place after all 100 events have been observed. The conventional log-rank test will be used for the interim analysis, and the maximum of the standardized weighted log-rank test statistics of FH(0,0) and FH(0,1) will be used at the final analysis. For a total one-sided 2.5% significance level with an interim alpha of 0.0015, Prior (2020) reports that the resulting power is abut 73%. We now verify this through analytic calculation and simulation.
First, we derive the critical values at the interim and final analyses. For the interim analysis, only one log-rank test will be used, hence the critical value is u1 = Φ−1(1 − 0.0015) = 2.968. For the final analysis, the critical value u2 satisfies P0(Z1, 1 < u1, max (Z1, 2, Z2, 2) < u2) = 1 − 0.025 which is the same as P0(Z1, 1 < u1, Z1, 2 < u2, Z2, 2 < u2) = 0.975 (Eq.1) Let UFH(p, q), i denote the numerator of the FH(p,q) weighted log-rank test statistic at analysis i, and VFH(p, q), i its variance. Then WFH(p, q), i = UFH(p, q), i/VFH(p, q), i1/2. In addition, similar to Karrison (2016), we can show that $$ Cov(U_{FH(p_1,q_1),1}, U_{FH(p_2,q_2),2}) = V_{FH\left(\frac{p_1+p_2}{2},\frac{q_1+q_2}{2}\right),1} $$
First, we find the time when 50 and 99.9 events are expected to have occurred.
(time = caltime(nevents=c(50, 99.9), accrualIntensity=25,
piecewiseSurvivalTime=c(0, 1.5),
lambda1=c(0.25, 0.125), lambda2=c(0.25, 0.25),
accrualDuration=4, followupTime=60))
#> [1] 5.362939 50.323682Then, we obtain the the means and variances of weighted log-rank test statistics at the interim and final analyses for relevant FH weights.
(lr00 = lrstat(time=c(5.363, 50.324), accrualIntensity=25,
piecewiseSurvivalTime=c(0, 1.5),
lambda1=c(0.25, 0.125), lambda2=c(0.25, 0.25),
accrualDuration=4, followupTime=60,
rho1=0, rho2=0, numSubintervals=10000))
#> time subjects nevents nevents1 nevents2 ndropouts ndropouts1 ndropouts2
#> 1 5.363 100 50.00056 22.47993 27.52063 0 0 0
#> 2 50.324 100 99.90000 49.90030 49.99970 0 0 0
#> nfmax nfmax1 nfmax2 uscore vscore logRankZ hazardRatioH0
#> 1 0 0 0 -3.178997 12.46380 -0.900461 1
#> 2 0 0 0 -10.544683 22.26989 -2.234470 1
(lr01 = lrstat(time=c(5.363, 50.324), accrualIntensity=25,
piecewiseSurvivalTime=c(0, 1.5),
lambda1=c(0.25, 0.125), lambda2=c(0.25, 0.25),
accrualDuration=4, followupTime=60,
rho1=0, rho2=1, numSubintervals=10000))
#> time subjects nevents nevents1 nevents2 ndropouts ndropouts1 ndropouts2
#> 1 5.363 100 50.00056 22.47993 27.52063 0 0 0
#> 2 50.324 100 99.90000 49.90030 49.99970 0 0 0
#> nfmax nfmax1 nfmax2 uscore vscore logRankZ hazardRatioH0
#> 1 0 0 0 -1.385269 1.164021 -1.283966 1
#> 2 0 0 0 -6.608297 6.161010 -2.662340 1
(lr0h = lrstat(time=c(5.363, 50.324), accrualIntensity=25,
piecewiseSurvivalTime=c(0, 1.5),
lambda1=c(0.25, 0.125), lambda2=c(0.25, 0.25),
accrualDuration=4, followupTime=60,
rho1=0, rho2=0.5, numSubintervals=10000))
#> time subjects nevents nevents1 nevents2 ndropouts ndropouts1 ndropouts2
#> 1 5.363 100 50.00056 22.47993 27.52063 0 0 0
#> 2 50.324 100 99.90000 49.90030 49.99970 0 0 0
#> nfmax nfmax1 nfmax2 uscore vscore logRankZ hazardRatioH0
#> 1 0 0 0 -2.089088 3.241192 -1.160391 1
#> 2 0 0 0 -8.253879 10.082599 -2.599392 1It follows that the mean of Z = (Z1, 1, Z1, 2, Z2, 2) is $$ \left(\frac{3.179}{\sqrt{12.464}}, \frac{10.545}{\sqrt{22.270}}, \frac{6.608}{\sqrt{6.161}} \right) = (0.900, 2.234, 2.662) $$ and the covariance matrix of Z is $$ \left(\begin{array}{ccc} 1 & \sqrt{\frac{12.464}{22.270}} & \frac{3.241}{\sqrt{12.464\times 6.161}} \\ \sqrt{\frac{12.464}{22.270}} & 1 & \frac{10.083}{\sqrt{22.270\times 6.161}} \\ \frac{3.241}{\sqrt{12.464\times 6.161}} & \frac{10.083}{\sqrt{22.270\times 6.161}} & 1 \end{array} \right) = \left(\begin{array}{ccc} 1 & 0.748 & 0.370 \\ 0.748 & 1 & 0.861 \\ 0.370 & 0.861 & 1 \end{array} \right) $$ Now, we obtain the critical value u2 by solving equation (1).
library(mvtnorm)
mu = c(0.900, 2.234, 2.662)
sigma = matrix(c(1, 0.748, 0.370, 0.748, 1, 0.861, 0.370, 0.861, 1), 3, 3)
u1 = 2.968
alpha = 0.025
f <- function(u2, u1, sigma, alpha) {
1 - pmvnorm(upper=c(u1, u2, u2), corr=sigma, algorithm="Miwa") - alpha
}
(u2 = uniroot(f, c(1,3), u1, sigma, alpha)$root)
#> [1] 2.136998The power can be estimated by plugging in the mean under the alternative hypothesis.
1 - pmvnorm(upper=c(u1, u2, u2), corr=sigma, mean=mu, algorithm="Miwa")
#> [1] 0.7243152
#> attr(,"error")
#> [1] NA
#> attr(,"msg")
#> [1] "Normal Completion"For the simulation study, we use very large critical values for the FH(0,0) and FH(0,1) log-rank statistics at the interim and final analyses for each iteration, and then construct the maximum combo test statistic at the final analysis. Finally, we tally the rejections across iterations to estimate the power. The same seed should be used to produce identical simulated data.
sim1 = lrsim(kMax = 2, informationRates = c(0.5, 1),
criticalValues = c(6, 6),
accrualIntensity = 25,
piecewiseSurvivalTime = c(0, 1.5),
lambda1 = c(0.25, 0.125), lambda2 = c(0.25, 0.25),
accrualDuration = 4,
rho1 = 0, rho2 = 0,
plannedEvents = c(50, 100),
maxNumberOfIterations = 10000,
seed = 314159)
sim2 = lrsim(kMax = 2, informationRates = c(0.5, 1),
criticalValues = c(6, 6),
accrualIntensity = 25,
piecewiseSurvivalTime = c(0, 1.5),
lambda1 = c(0.25, 0.125), lambda2 = c(0.25, 0.25),
accrualDuration = 4,
rho1 = 0, rho2 = 1,
plannedEvents = c(50, 100),
maxNumberOfIterations = 10000,
seed = 314159)
w1max = subset(-sim1$sumdata$logRankStatistic, sim1$sumdata$stageNumber==1)
w2max = pmax(-sim1$sumdata$logRankStatistic, -sim2$sumdata$logRankStatistic)
w2max = subset(w2max, sim1$sumdata$stageNumber==2)
mean((w1max > u1) | (w2max > u2))
#> [1] 0.7302The analytic method yielded a power of about 72%, while the simulation method yielded a power of about 73%, both are close to that reported by Prior (2020).